Directions to unlock your HTC Touch Pro are below. READ CAREFULLY
SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I’m really sorry), zule/Shadowmite and no2chem for testing!!!
there are three HSPL’s now (for the non-verizon ones it is a similar scene to Diamond_C).
- 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc.
- 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands.
- 0.35 for Verizon touch pro’s ONLY.
Important:
first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!
preparations before flash:
- make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d…DisplayLang=en
- if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi…ce-center.mspx
- now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).
instructions:
- download Hard-SPL package from attachment, extract to an empty folder.
- you must Have Phone Synced with PC in Windows Mobile!
- run HardSPL exe that you downloaded before.
- follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
- it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
- SPL flashes, device automatically reboots, job done.
- to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn’t obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.
NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step – after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro’s.
Raphael_CDMA_HSPL_025_MFG.zip
Raphael_CDMA_Relocker.zip
Please Donate to the creators, the CDMA Raphael Project Team – – Thanks!!
Related posts:
{ 1 trackback }
{ 0 comments… add one now }